Hot rolled I - beam
Material
Steel grades with the chemical composition and the mechanical characteristics according to DIN 17100

Dimensions, weight and limit tolerances.
According to DIN 1025/1

Download Drawing

Symbol

Dimensions and limit tolerances [mm]

Weight

I

 h b t s, r1   *) r2

Kg/m
260 260 ±3,0 113 ±2,5 14,1 -1,0 9,4 ±0,5 5,6 41,4
280 280 119 15,2 10,1 ±0,6 6,1 47,9
300 300 125 16,2 10,8 6,5 54,2
320 320 131 ±3,0 17,3 -1,5 11,5 6,9 61,0
360 360 143 19,5 13,0 ±0,7 7,8 76,1
400 400 155 21,6 14,4 ±0,8 8,6 92,4
*) The limit tolerance applies only to the siye ``s``
Note: Lengths up to 18 m available on request

Shape deviations.
Maximum inclination of the flanges 1% of width
Web concavity related to height max. 1,5 mm
Web eccentricity max. 1% of width
Bevel of the external flange corners max. 3 mm
Maximum permissible deviation from straightness 0,0015 x length

Delivery lengths.
Length types

Delivery lengths [m]

Permitted dev. [mm]
Manufacture lengths 4 - 12 -
Fixed lengths max. 12 + 100/ -0

Delivery state, delivery
Delivery state Delivery
Rough rolled, straightened and without heat treatment Without packing and unprotected to corrosion, not bundled or in bundles with the weight of max.3 t.